Chevron Belt-cleaner
Chevron Belt-cleaner
Effective and affordable
Chevron, cleated, and raised-rib belts present a special problem for efficient cleaning. However, not cleaning these belts lets the carryback move along the return belt and cause all the familiar problems: mistracking, buildup, and premature wear on idler rollers, resulting in belt wear and damage.
The Chevron Belt Cleaner effectively cleans cleated, raised-rib, and chevron belts without the clogging and rapid wear associated with conventional brush-type cleaners. Finger length, spacing, and rotary action allows the carryback to fall free instead of clogging. Drum life ranges from 1 to 3 years depending upon the application, conditions, and the material being conveyed.
Features and Benefits
50 mm long-wearing SBR rubber fingers gently dislodge carryback from chevron or raised ribs
Compatible with reversing belts and mechanical fasteners
Versatile tensioner kit can be mounted to push-up or pull-up the cleaner
Belt speeds up to 2.5 m/sec
CEMA Class 3
Belt widths 450 to 2100 mm
IMPROVE CONVEYOR BELT CLEANLINESS
Can be mounted 15 to 20 mm from the point where the belt leaves the head pulley on down the conveyor line
Cleaning efficiency can be increased 50 to 70 percent by adding a second
Technical Specifications
Maximum Belt Speed: 2.5 M/sec
Temperature Rating: -35° C to 82° C
Overall Diameter: 238mm
Cleaner Material: Rubber 45-A durometer
CEMA Cleaner Rating: Class 3
Shaft Length: Belt Width + 750mm
Shaft Size: 25mm Hex Shaft
Finger Length: 50mm
Rubber Finger Ring Width: 75mm
Maximum Chevron or Cleat Height: 25mm
Available for Belt Widths: 450 to 2100mm
Horizontal Clearance Required: 250mm
Vertical Clearance Required: 250mm
Gallery
